Welcome To Know Our Products, We Can Offer You High Quality Products!

Welcome To Know Our Products, We Can Offer You High Quality Products!

WhatsApp / WeChat:

Quote Now

14

2026-04


150ZJ-50 Slurry Pump Anti‑Vortex Plate Design and Installation: Field Retrofit to Prevent Air Ingestion

150ZJ-50 slurry pump vortex air ingestion at low liquid levels – hazards and anti‑vortex plate design & installation. Includes dimension calculation, fabrication steps, installation procedure, and a real case study.

13

2026-04


100ZJ-48 Slurry Pump Wear Part Wear Rate in Fine Tailings: 30% vs 50% Concentration Comparison

100ZJ-48 slurry pump wear part wear rate comparison in fine tailings at 30% vs 50% solids. Based on 12 months field data – wear ratio, life prediction, and spare parts cost analysis.

13

2026-04


8/6E-AH Slurry Pump Expeller Seal Failure Causes: Excessive Clearance and Insufficient Seal Water Pressure

Two primary causes of 8/6E-AH slurry pump expeller seal failure: excessive expeller-to-cover clearance and insufficient seal water pressure. Includes inspection methods, adjustment solutions, and prevention.

13

2026-04


10/8F-AH Large Slurry Pump Bearing Clearance Adjustment: Comparison of Cold Shrink and Hot Expansion Methods

10/8F-AH large slurry pump bearing clearance adjustment: compare liquid nitrogen cold shrink vs. oil bath hot expansion – operation points, application conditions, and clearance control. Includes common mistakes and case study.

10

2026-04


4/3C-AH Slurry Pump Seal Water Pressure Setting in Heavy Media Coal Preparation: Too High or Too Low Is a Pitfall

How to set seal water pressure for 4/3C-AH slurry pump in heavy media coal preparation? Too low causes media backflow; too high accelerates sleeve wear. Includes calculation formula, quick table, and daily checklist.

< ···2829303132··· >

Service Hotline

+8615364966178

Email Us

info@xo-pump.com

Whatsapp